Brochure
Brochure

Air Conditioner Energy Saver

NERGY SAVING up To 20% can be achieved using our SEQUENTIAL CONTROLLERS. Energy saving can be optimized by choosing appropriate program to meet the specific need among the various programs available.


The SEQUENTIAL CONTROLLERS and timers are designed using real time clock which has got nonvolatile memory, hence power interruption of any duration will not call for reprogramming or manual intervention. These controllers are programmed to switch OFF all the Air Conditioners during off peak hours resulting in more Energy saving.

Technical Specifications

  • Technology: RISC based Micro Controller with real time clock.
  • Operating Voltage : 230 V +/- 20%
  • Operating Frequency: 50 Hz.
  • No of A.C. Units: 2 no’s to 6 no’s
  • Operating cycles: 4/ 6/ 8/12 Hour.
  • Operating method
    • Above 26º C all AC's ON
    • Between 23ºC to 26ºC minimum AC ON
    • Below 23ºC all AC's OFF
  • Time delay for switching: 2 to 3 min.(initial)
  • Temperature sensor: High sensitive semiconductor temperature sensor Audio and visual indication
  • By-pass (optional)
  • An alarm is provided to alert the failure of any working air conditioner.
  • Remote monitor is possible.
Air Conditioner Energy Saver

Protections

  • High voltage protection
  • Low voltage protection
  • Overload protection
  • EMI/RFI filters provided to suppress spikes and surges

Models

  • PST 29 useful for two numbers of AC's working in a room
  • PST 39 useful for three numbers of AC's working in a room
  • PST 49 useful for four numbers of AC's working in a room
  • PST 69 useful for six numbers of AC's working in a room

Street Light Automation Systems

  • Energy conservation is picked up paramount importance in all areas
  • Electricity is a boon to mankind but it can cause unreasonable burden to all if it is not used efficiently. India has 16 % of world Population but less than 1% of World Energy Resources
  • OUR EFFORT TO CONSERVE ENERGY IS Energy Conservation involves avoiding wastage of energy and adopting methods to save energy without sacrificing comforts and needs
  • SERVOMAX Streetlight Controller controls any loads automatically as programmed
  • The system comprises of micro controllers and RTC (Real time Clock) and user Programmable settings
  • Micro controllers programmed are as per the requirements of on-off timings
  • Program can be done for daily, weekly, fortnightly, monthly, quarterly, half yearly, yearly, and as per seasonal timing

Features

  • Micro Controller based.
  • With built in Real Time Clock.
  • Additional profiles can be programmed photo sensor implemented(optional)
  • Two line LCD display (LED Display Optional)
  • Parameter settings for each season for total year even every quarter of the Month
  • IP:55 protection
  • Power consumption less than 1 watt
  • Protected from spikes and surges
  • Protected from wide Voltage fluctuation
  • High voltage protection
  • Over load protection
  • short circuit protection
  • By pass facility
  • With stands for wide temperature variation 5º C to 60º C
  • With highly accurate timer
  • Applicable for any load
  • Remote on/off facility
  • User friendly Design
  • Optional feature of infra red light sensing control
  • Program available to work for multi channel to switch on/off alternative lights.

Most suitable to :

  • Unmanned, accurate on-off operations, avoiding the human errors thus power savings in all factories, stockyards, ports, public lighting systems etc.
  • To On –off municipal, public lighting systems at regular timings as programmed to eliminate human attention and error.
  • To ring bells at correct intervals in schools, colleges & factories.

MODELS AVAILABLE

CAPACITIES

To control single phase load

Single Phase up to 30 KVA

To control two phase load Two

Phase up to 100 KVA

To control three Phase load

Three phase up to 200 KVA

Universal Timer (Model PST 9)

Universal Timer is an ideal device to switch On & Off the load without any manual interference.


This device is based on RTC. It can be programmed according to the user requirement. it will operate with a time interval of 30 min or 60min duration, the duration of on time & off time can be selected by the position of DIP switches provided.


This can be used for operating aviation lamps air conditioners, glow sign boards and all lighting applications or industry and domestic.