Full Name*
E-Mail ID*

Can't read the image? click here to refresh


Power Distribution Unit

Power distribution unit is fitted with multiple outputs designed to distribute electrical power.

In a data centre, all the distributed power loads are connected through a non linear power source, due to which HARMONICS generation is unavoidable. These generated Harmonics are flow back and directly effects the mains power source, which a UPS. The effect of harmonics de-rates the capacity of UPS. Hence 100% utilization of UPS capacity becomes wasted. The effect of harmonics also creates much heat in the transformers of UPS.

To eliminate these direct effects on UPS, K- Factor transformers are designed. K factor transformers are designed based on the design of K Factor transformer helps us to depend on much to eliminate or withstanding from the effects of Harmonics.

Technical Specifications

  • Double wound, High Isolation.
  • Double sized neutral.
  • Insulation class “H”.
  • Regulation is better than 3.5%.
  • Overload rating of 100% for 10 secs.
  • Core of CRGO and conductor of copper.
  • Natural / Forced Air Cooled.
  • As per IS: 2026 standards.
  • Attenuation: 80 db CMRR and 60 db CMNR.
  • Primary connects as DELTA, secondary connection as STAR.
Power Distribution Unit


  • Floor mounting Panel board with MS angles and Ms Sheets with powder coated Paint and suitable provisions for cable.
  • Distributed outgoing through sub branch breakers and branch breakers.
  • Extra sub breakers also provided.
  • Suitable capacity 4 pole incomer.
  • LED indications provided to read the availability of incoming supply.
  • Multi parameter reading meter to read Voltages, currents and power is incorporated.

Most suitable for

  • Data Centre’s
  • Telecom